Optional) Setting Parameters Before Using U2000-Spm - Huawei MTS9300A Installation Manual

MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
Logging In to the WebUI
Step 1 Set the laptop IP address to be in the same network segment as the SMU IP
address.
For example, if the SMU has an IP address of 192.168.0.10, a subnet mask of
255.255.255.0, and a default gateway of 192.168.0.1, set the IP address to
192.168.0.11, subnet mask to 255.255.255.0, and default gateway to 192.168.0.1
on the PC.
Step 2 Enter https://monitoring IP address (such as https://192.168.0.10) in the address
box of the browser, and then press Enter to enter the WebUI login page.
Figure 8-9 WebUI login page
----End
8.10.2 (Optional) Setting Parameters Before Using U2000-
SPM
Context
If a Huawei BBU is deployed, set the Northbound and M/S Protocol parameters.
Issue 01 (2021-05-30)
NO TE
The preset user names include admin, engineer, and operator, and the preset password is
Changeme. The user names are respectively used by administrators, engineers, and
operators.
Change the preset password upon your first login to ensure the system security.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning
64