MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
● Ensure that the upstream AC input circuit breaker is OFF, and attach labels such
as "No operations allowed."
● Switch off all circuit breakers before installing cables.
5.1 (Optional) Installing Dry Contact Signal Cables
Procedure
Step 1 Press the contact plate using a flat-head screwdriver to flip the metal spring inside
each dry contact.
Step 2 Connect the signal cables to the corresponding dry contacts.
Step 3 Remove the flat-head screwdriver and check that the signal cables are connected
securely.
Figure 5-1 Installing a dry contact signal cable
(1) Contact plate
----End
Issue 01 (2021-05-30)
D ANGER
Copyright © Huawei Technologies Co., Ltd.
5
Installing Cables
(2) Dry contact port
5 Installing Cables
30