Setting The Ac Input System; Setting The 57 V Constant Voltage Parameter; Setting Dcdb Parameters - Huawei MTS9300A Installation Manual

MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
Main Menu Second-Level
Menu

8.5 Setting the AC Input System

Set the AC input system based on site requirements.
Table 8-3 Setting the AC input system
Main Menu
Parameters Settings

8.6 Setting the 57 V Constant Voltage Parameter

Set the 57 V constant voltage parameter based on site requirements.
Table 8-4 Setting the 57 V constant voltage parameter
Main Menu Second-Level
Menu
Parameters Li Battery
Settings

8.7 Setting DCDB Parameters

Set DCDB parameters based on site requirements.
Table 8-5 Setting DCDB parameters
Main Menu Second-Level
Menu
Parameters DC Power
Settings
Issue 01 (2021-05-30)
Third-Level
Menu
NTP Enable
Second-Level
Menu
Mains
Third-Level
Menu
Basic
Parameters
Third-Level
Menu
DMU
Copyright © Huawei Technologies Co., Ltd.
Default Value
No
Third-Level
Menu
AC Mode
Fourth-Level Setting
Menu
Work Mode 57V Mode
Fourth-Level Menu
LLVD n Enabled
8 Commissioning
Settings
Yes/No
NOTE
Set the parameter to Yes
if you need to
synchronize the SMU
time and the site
network server time.
Setting
Set as required.
Value
● 57V Mode
● 48V Mode
Value
Enable/ Disable
55