Setting The Date And Time - Huawei MTS9300A Installation Manual

MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
Item
Battery model
The SMU may
restart.
Battery n
Connected
Single-String
Cap.
The SMU may
restart.

8.4 Setting the Date and Time

Set the date and time as required. Skip the setting if they have been correctly set
in the setup wizard.
Table 8-2 Setting the date and time
Main Menu Second-Level
Menu
Setting Wizard Date and Time
NOTE
The date and time
vary with time
zones. Set the
time zone, date,
and time based
on the local
situation.
Issue 01 (2021-05-30)
Setting Value
NOTE
If the battery model is set to ESM-A, you do not need to set battery
parameters after the SMU restarts.
Yes
Yes/No
NOTE
● If battery routes 1 and 2 are respectively connected to a battery
string (a battery string consists of four 12 V, 150 Ah batteries in
series), set Battery 1 Connected and Battery 2 Connected to Yes
and others to No, and set Single-String Cap. to 150 Ah.
● If battery route 1 is connected to two parallel battery strings (one
battery string consists of four 12 V, 150 Ah batteries in series), set
Battery 1 Connected to Yes and others to No, and set Single-
String Cap. to 300 Ah.
Rated capacity of each battery string
NOTE
A battery string includes a set of batteries controlled by one circuit
breaker or fuse.
Yes
NO TE
● The LCD backlight turns off if no button is pressed within 30 seconds.
● Re-login is required if no button is pressed within 1 minute.
● The preset password for login is 000001.
Third-Level
Menu
Time Zone
Date and Time
Copyright © Huawei Technologies Co., Ltd.
Default Value Settings
UTC +08:00 Set to the local time
Beijing zone.
- Set to the local date
and time.
8 Commissioning
54