Table of Contents
Advertisement
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
----End
Connecting DC Output Power Cables to 63 A Circuit Breakers
Step 1 Use cables (cross-sectional area: 1.5–16 mm
DC output power cables.
Table 5-2 Preparing cables
Cross-Sectional
Area
2
1.5 mm
2
4 mm
2
10 mm
2
16 mm
Issue 01 (2021-05-30)
Figure 5-8 Installing DC output power cables
(1) DC load
Recommended Cord End Terminal
Specifications
Pre-insulated and with an insertion
depth of 18 mm
Pre-insulated and with an insertion
depth of 18 mm
Pre-insulated and with an insertion
depth of 18 mm
Pre-insulated and with an insertion
depth of 18 mm (supports bare wire
installation)
Copyright © Huawei Technologies Co., Ltd.
2
) and cord end terminals to prepare
Recommended Bare Wire
Specifications
2
16 mm
NOTICE
Cord end terminals are
recommended. When bare wires are
used, you are advised to add heat
shrink tubing to ensure that the wire
ends are not split.
5 Installing Cables
35
Advertisement
Table of Contents
