Mxa920 Parts - Shure MXA920 Manual

MXA920 Parts

1. Mute status LED
Customize LED color and behavior in Designer: Device configuration > Settings > Lights.
Default Settings
Microphone Status
Active
Muted
Hardware identification
Firmware update in progress
Reset
Error
Device power-up
Note: If LEDs are disabled, they will still turn on when the device powers up or when an error state occurs.
2. Reset button
3. RJ-45 network port
4. Network status LED (green)
◦ Off = No network link
◦ On = Network link established
◦ Flashing = Network link active
5. Network speed LED (amber)
◦ Off = 10/100 Mbps
◦ On = 1 Gbps
6. Eyelet screws for suspension mounting (12 mm diameter)
7. VESA MIS-D mounting holes
LED Color/Behavior
Green (solid)
Red (solid)
Green (flashing)
Green (progresses along bar)
Network reset: Red (progresses along bar)
Factory reset: Triggers device power-up
Red (split, alternate flashing)
Multi-color flash, then blue (moves quickly back and forth
across bar)
Shure Incorporated
8/50