Shure MXA920 Manual page 42

3. Mask the entire flat area in the center of the back cover. Mask the 7 tabs on the inside of the back cover to keep paint
out of the screw threads.
4. Paint the outside of the back cover.
Step 3: Reassemble the Microphone
Let the paint dry before reassembling.
1. Use the 12 screws to attach the back cover to the processor.
2. Use the 7 screws to reattach the aluminum support panel.
3. Reinstall the lightpipe on the grille by snapping it into place.
4. Attach the fabric piece to the grille.
5. Align the grille with the 7 tabs on the back cover. Set it down and rotate the grille as shown to engage the tabs.
Shure Incorporated
42/50