Shure MXA920 Manual page 37

5. Slide the flat grille out of the frame.
6. Carefully remove the foam piece from the grille. Pull from the edges, where it is attached with hook-and-loop fastener
strips.
Important: Do not paint the foam.
7. Before painting, reinstall the side of the frame you removed in step 1.4.
Step 2: Mask and Paint
1. Use masking tape to cover the entire extrusion (highlighted in black) that runs along the inside of the frame. This en­
sures that the necessary metal pieces make contact when reassembled.
2. Use masking tape to cover the hook-and-loop fastener strips on the grille.
3. Paint the frame and grille. Let them dry completely before reassembling. Do not paint any part of the main assembly.
Step 3: Reassembly
1. Attach the foam piece to the grille with the hook-and-loop fastener strips.
Shure Incorporated
37/50