Table of Contents
Advertisement
NOTICE
Extensive damage to property may result if the device is not connected correctly
That is why you should observe the warning information:
•
Desktop installation:
Place the device on a solid and level surface. The attached stand, as well as the installation sur-
face, must be suitable for the weight of the device.
•
For mounting on a wall or ceiling suspension:
The mount unit must be suitable for the weight of the device.
•
For installation in a rack:
Observe the installation sequence, and provide ventilation for the device.
Provide adequate air circulation
When installing the device, ensure that there is adequate air circulation for operation. The permissi-
ble ambient temperature range must not be violated. Otherwise, the device could be destroyed by
overheating.
Avoid sources of heat
Do not install the device in the vicinity of sources of heat, such as radiators, heating appliances or
other devices that can generate or emit heat.
Do not subject the device to jolting or shocks
The device contains sensitive electronic components that could be damaged by jolting or shocks.
Only switch on a cold device following adaptation to room temperature
If the device is brought into a room with a higher or rising temperature, condensed water will form in
and on the device. Do not switch on the device until the condensed water has evaporated. Other-
wise, the device could be damaged.
RadiForce LS580W
Instructions for Use, 08/2022
Safety information
2.1 General safety instructions
9
Advertisement
Table of Contents
