Environment Screen - Lincoln Electric 12926 Operator's Manual

VRTEX 360, 360+, TRANSPORT, TRANSPORT+
®
Figure 34 – Table setup & device status screen
(showing SMAW device needed but not connected)
Figure 35 – Table setup & device status screen
(showing all needed devices are connected)
COUPON INSERTION
Insert the VR coupon into the desired position in the VR table. See
Figure 36. Make sure the coupon is fully seated into the track and
then lock the coupon in place by pushing in the knob at the end of the
arm. To release, pull the knob into the unlocked position and remove
the coupon. When the system is in use, the coupon should always be
locked in place to assure system accuracy.
CAUTION
Position coupon stand at least eighteen inches from
monitor and any potential source of electrical and
magnetic interference.
Figure 36 – VR coupon (unlocked position)

ENVIRONMENT SCREEN

OVERVIEW
The VRTEX comes pre-configured with a number of different virtual
welding environments. To select an environment, touch the desired
icon. See Figure 37.
CAUTION
When welding in virtual reality be mindful of your real
world surroundings and hazards at all times to avoid
injury.
Figure 37 – Environment screen
21
OPERATION (USER MODE)