Operation; Powering On; License Agreement - Lincoln Electric 12926 Operator's Manual

VRTEX 360, 360+, TRANSPORT, TRANSPORT+
®

POWERING ON

* Ensure coupon arm cable is connected before turning on the
machine.
1. Pressing the power button on the front of the machine powers
up the VRTEX system. See Figure 27.
NOTE: Select Log Out and Shutdown from the red menu icon to turn
off the system. Pressing the power button will also shutdown
the system.
Figure 27 – Power button
NOTE: Main power disconnect located in the rear of the machine.

LICENSE AGREEMENT

The License Agreement is an agreement to the terms and conditions
on which Lincoln Electric grants to the business entity registered
with Lincoln on the purchase of the Software ("Software Licensee"),
a non-exclusive license to use the Software and Documentation
accompanying this license on the VRTEX Virtual Reality Welding
Trainer. The license granted herein is strictly limited to the installation
of said Software on the VRTEX Virtual Reality Welding Trainer that the
Licensee has properly registered with Lincoln.
This is the first screen that will appear once the Software upgrade has
been accomplished. In past upgrades the system would move directly
into the License page of the Instructors mode. This upgrade the user
must agree to the terms and conditions before moving forward.
SELECTING AGREE OR DO NOT AGREE
Once the user has completely read the EULA select the "I have read
the EULA and agreed to its terms" and move forward or select "I do
not agree" which will turn off the machine. Selecting the "I have read
the EULA and agreed to its terms" will take the user to the "License"
screen.
NOTE: The user cannot continue on the VRTEX until they AGREE to the
License Agreement.
Figure 28 – End user license agreement (EULA)
POWER
BUTTON
18

OPERATION

Select the icon
to choose "I
have read the
EULA and
agree to its
terms."