Transport; High Frequency Interference Protection; Radio Frequency Interference - Lincoln Electric 12926 Operator's Manual

VRTEX 360, 360+, TRANSPORT, TRANSPORT+
®

TRANSPORT

The VRTEX has two swivel, locking casters for easy transport. When
the VRTEX is not being transported be sure the machine is on level
ground and lock the casters to prevent unwanted movement.
• Only transport the machine on level ground.
• Move the machine slowly and only when all four wheels are in
contact with the ground.
• Do not move over uneven ground or curbs.
• The VRTEX should never be lifted with an overhead crane.
HIGH FREQUENCY
INTERFERENCE
PROTECTION
CAUTION
USE CAUTION WHEN OPERATING THIS MACHINE
AROUND OTHER EQUIPMENT.
• Large equipment, such as cranes, may interfere with the
operation of this machine.
• This machine may interfere with the operation of other
equipment in work / training area.
• High frequency process, such as TIG machines, may
interfere with the operation of this machine.
• Welding / cutting machine with improper grounding may
interfere with the operation of this machine.
------------------------------------------------------------------------
RADIO FREQUENCY
INTERFERENCE
This system contains a sensitive magnetic positioning sensor that
can become disturbed in the presence of conducted RF noise.
Disturbances can manifest themselves in slight jarring of the virtual
environment.
If interference on the sensor cable is an issue, it should be
repositioned until the jarring stops. In the case of noise on the AC
port being an issue, a noise suppressing ferrite bead can be added
to the AC power cord which will eliminate the interference. Please
contact your Lincoln Electric Support Center for details.
5
INSTALLATION