With Handheld Controller (G1323B)
To configure the TCP/IP parameters before connecting the detector to the
network, the Handheld Controller (G1323B with firmware B.04.01 or above)
can be used.
1 Press F5 "Views", select "System" and press the "Enter" key.
2 Press F2 "Configure", select the module where the LAN cable is installed
Figure 24
3 Press F1 "LAN"
Figure 25
1100 Series DAD and MWD User Manual
and press the "Enter" key
Select module
(Figure
Select LAN
(Figure
24).
25).
LAN Configuration
51
3