Setup2 - Sony Cyber-Shot DSC-T7 User Manual

Setup2 Fo. deta, o.the o pe at o, p ge 4 4
2
The default settings are marked with ,_.
Selects the method used to assign file numbers to images.
_' Series Assigns numbers to files in sequence e'.en if the recording
lblder or the "Memory Stick Duo" is changed. (When the
replaced "Memory Stick Duo" contains a file with a number
higher than the last assigned number, a munber one higher
than the largest number is assigned.)
Reset Starts from 0/)01 each time the folder is changed. (When the
recording lblder contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PietBridge
Connects the camera to a PictBridge compliant printer
(page 69).
PTP When [PTP] (Picture Transli:r Protocol) is set and the camera
is connected to a computer, the images in the recording folder
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects thecamera toa computer (page 58).
Sets the video signal output according to connected equipment.
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., lbr Europe).
52