Setup2 - Sony Cyber-shot DSC-H5 User's Manual / Troubleshooting

Setup2
2
Fordetai/sonthe operation_ page56
The defaull seltings are marked wilh _.
Selects the method used to assign file immbers to images.
¢Y Series
Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick Duo" is changed. (When the
replaced "Memory Stick Duo" contains a file with a number
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Reset Stm_s from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PietBridge
Connects the camera to a PictBridge compliant printer
(page 86).
PTP When [PTP] (Picture Translk._rProtocol) is set and the camera
is connected to a computer, the images in the recording lkdder
on the camera are copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Mass Storage Estahlishes a Mass Storage connection between the camera
and a computer or other USB device (page 73).
Auto The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 73 and 86).
• If the camera and a PiclBridge compliant printer cannot be
connected when set m [Auto]. change the setling m
[PictBridgel.
• If file camera and
a
conlpuler or oilier USB device cunnol be
connected when set m [Auto], change the setling m [Mass
Storage].
67