Sony Cyber-Shot DSC-T7 User Manual page 89

Enable printer to connect
• [USB Connect]
is set to [PictBridge],
howLwer the Ciltlleltl is connected to a
non-PictBridge compliant device.
Check the device.
• The connection is not established.
Disconnect and connect the USB cable
again. If an error message is indicated
on the printer, refer to the operating
instructions supplied wilh the winter.
Connect to PictBridge device
• You tried to print images bel_we the
winter connection was established.
Connect to a PictBridge compliant
winter.
No printable image
• You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
• You tried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printeE
• Check iftheimage you_antto printis
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the USB cable.
Processing
• The winter is c:mceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
winter.
g
8g