Table of Contents
Advertisement
Playback Your Recordings *
Before you begin
« Connect the Palmcorder to a power
source. (pp. 13, 14)
e Insert a recorded cassette.
Playback using the LCD
Monitor
You can also use the LCD monitor to
playback your recording.
1 Set the POWER to VCR.
* The POWER lamp lights red.
« Be sure POWER
is fully turned to the
VCR position.
2 Press LCD-OPEN to unlock the LCD
monitor and swing open.
3 Press <4 (REWIND/SEARCH) to
rewind the tape.
4 Press » (PLAY) to start playback.
5 Press E (STOP) to stop playback.
e When the tape reaches its beginning
IS
during rewind or rewind search, it will
PM)
stop automatically.
* When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
e Using the LCD monitor reduces battery
operating time.
* You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180° and swing it up against the
Palmcorder body as shown.
You can connect earphones (not supplied)
to the PHONE Jack.
31
Advertisement
Table of Contents
