Panasonic Digital Palmcorder Multicam PV-DV92 Operating Instructions Manual page 14

Supplying Power
Battery Care
Caution:
* Charge only with specified charger.
* Charge the Battery within an ambient
temperature range of 10°C (50 °F) and
30 °C (86 °F).
¢ The Battery may be warm after charging or just
after use. This is normal. f
* Do not use an insufficiently charged or worn out
Battery.
e If charging is done in extreme low or high
temperatures, Battery charge time increases.
Safety precautions:
* Do not place the Battery near, or dispose of in fire.
+ Do not directly connect (short circuit) the positive
(+) and negative (—) terminals.
« Never attempt to disassemble or reassembie the
Battery.
U.S.A. CONSUMERS: ATTENTION:
To avoid damage to the Battery:
* Do not drop or jar the Battery.
* Use the Battery with specified models only.
> If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To insure longer battery life:
+ While not in use, remove Battery from the
Palmcorder and AC Adaptor and store ina
cool, dark, dry place. If you leave the Battery in
the Palmcorder or on the AC Adaptor, the Battery
will no longer be rechargeable.
¢ Keep the Battery terminals clean.
A lithium ¡on/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for intormation
on how to recycle this battery.
POWER
DC Cable Lamp
(Supplied)
1 Slide the Battery downward while
sliding BATT RELEASE to remove the
Battery Pack. (p. 13)
insert the DC Cable into the DC IN
Terminal.
Connect the other end of the DC
Cable to the AC Adaptor as shown.
Plug in the AC Adaptor.
* The POWER Lamp on the AC
Adaptor lights up.
10
* When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1 W of electric power when plugged into
an AC outlet even when not in use.)
ð DC Output Connector
14
For assistance, please call: 1-800-211-PANA(7262) or send &mail to: consumerproducts € panasonic.com