Table of Contents
Advertisement
Operating the DSP and Equalizer
Note:
e if the control is idle for about 5 seconds after each
operation, the unit returns to the previous mode.
2
—
=
Setting in the adjustment mode
Note:
e When the sub woofer or parametric equalizer is
turned off, it cannot be adjusted.
Select an item to be adjusted following step 3) in
the previous subsection
"Basic settings" and
press ENT of the a-selector [4]. The setting
mode is displayed and each adjustment window
is displayed.
Slide or press the a-selector [1] following the
instruction on the display and make setting.
Adjusting the sub woofer
Volume or filter of the sub woofer is set.
Items shown in the table below can be set.
38
VRX8370R
Description
Slide the a-selector [1] to A (up) or V
tas
(down) to adjust the volume of the
(down) to set the frequency of the low
pass filter.
PF
LOP*? | (42 dB/oct © 18 dB/oct © 24 dB/oct)
Slide the a-selector [1] to & (up) or V
pF
(down) to set the frequency of the high
pass filter.
HPF
T
Slide the a-selector [7] to & (up) or ¥
L
Slide the o-selector [1] to & (up) or V
S
(down) to set the slope of low pass filter.
H
OL
woofer. (0 to 4)
LPF
(50 Hz <> 80 Hz © 120 Hz)
(Through «> 50 Hz © 80 Hz © 120 Hz)
Slide the o-selector [1] to & (up) or V
(down) to check the wiring of the speakers.
Slide the a-selector [1] to & (up) or V
(down) to set the slope of high pass filter.
SLOP*2 | (12 dB/oct © 18 dB/oct © 24 dB/oct)
(OFF <> FRONT-L © FRONT-R ©
REAR-L © REAR-R @ WOOFER-L @
TEST
ONE*S
WOOFER-R © ALL ch)
*1: To move the cursor to the next item, slide the a-
selector [1] to > vot and to the previous item,
slide the
button to q (left). (If you slide and hold
the a-selector
[4] to <q (left), the adjustment
menu returns.)
*2: The LPF SLOPE and the HPF SLOPE can be
adjusted when the DPH9300 is connected.
*3: The TEST TONE
can be adjusted when the
DPH9300/DPH7300 is connected.
Note:
e The seiting for the sub woofers cannot be preset
in "USERT to 6".
Adjusting the parametric equalizer
Frequency characteristic in the cabin space can
be adjusted.
The items shown
in the table below can be
adjusted.
Press
ENT of the a-selector [1] to output the
TEST TONE (PINK NOISE) in the following order.
(eels —*»REAR—>
ALL-—~> rea)
¢ The preset selection display appears first.
Note:
e The settings made for the parametric equalizer
cannot be preset in "USERT to 6".
Advertisement
Table of Contents
