Download Print this page

Open/Close Button - Sony DTC-670 Operating Instructions Manual

Digital audio tape deck
Hide thumbs Also See for DTC-670:

Advertisement

[9] BALANCE control
Adjust the recording balance for the analog input signals.
When recording digital signals, it is not necessary to
adjust the recording balance.
Remote sensor
Receives the signal from the remote commander.
REC MODE selector
Normally set to the STANDARD position.
When this selector is set to the LONG position, you can
record analog input signals or digital signals with 32 kHz
in the long play mode.
TIMER switch
Normally set to the OFF position. When recording or
playing back at the desired time using a commercially
available audio timer, set to the REC position or the PLAY
position respectively.
COUNTER buttons
MODE: Selects the counter display in the display window
among the linear counter (tape running time), absolute
time, elapsed time of the selection, and total remaining
time of tape. Each time you press the button, the
display changes sequentially.
RESET: Resets the linear counter to "OM 00S".
OPEN/CLOSE button
Press to open or close the cassette compartment.
Tape operating buttons
@ (stop): Press to stop recording or playback.
» (play): Press to play back the tape.
@REC (recording): Press to enter the record-pause
mode. To start recording, press the PAUSE or >
button.
ItPAUSE (pause): Press to stop for a moment during
recording or playback. Torestart recording or playback,
press this button again or press the » button.
If the unit is left in the pause mode for about 10
minutes, it will automatically be released and the
deck will enter the stop mode. To restart recording
or playback from the stop mode, press the @REC or
» button respectively.
OREC MUTE (record muting): Press to insert a sound-
muted portion (space).
</>
(AMS): Press to locate the beginning of the
selection during the playback.
<¢</>> (rewind/review, fast-forward/cue): In the stop
mode, press to rewind/fast-forward the tape. During
playback, press to rewind or fast-forward the tape
while listening to the sound.
Headphones jack
Insert the headphones plug to this jack.
PHONE LEVEL control
The PHONE LEVEL control adjusts the headphones volume
level.
9

Advertisement

loading