Sony DTC-670 Operating Instructions Manual page 12

Co l-Talciitale Max: laecw-larem Oxelal age) es
Display Window :
i itt h
ff
[LONG] TEMAINING DIGITAL IN
(LONG) PGM TIME OPTICAL
Pir ABS TIME COAXIAL
SKIP ID
WRITE ERASE
The following functions can be performed only with the LONG play mode indicator
remote commander. Lights when recording or playback is being performed in
. ; the long play mode.
To turn off the display window
When the power is turned on, the display window is also .
turned on. During recording or playback, all display or TOC (Table Of Contents) indicator
some parts of the display can be turned off. When a pre-recorded DAT cassette is played back, this
Each time you press the DISPLAY MODE button, the indicator will light.
indicators change as follows:
REMAINING (remaining time): Lights when the counter
Normal indicators) <————-—_—_—____—_—__—__ shows the remaining time of the tape.
PGMTIME (program time): Lights when the counter shows
the elapsed time of the current selection.
Peak level meters and margin indicators go off. ABS TIME (absolute time) indicator: Lights when the
(The DISPLAY OFF indicator lights.) counter shows the elapsed time from the beginning of
the tape.
v
All the indicators go off during recording or playback'. Time indicator
(The DISPLAY OFF AUTO indicator lights momentarily
, Sram Indicates the tape running time, absolute time, elapsed
just before the indicators go off.)
time of the current selection or remaining time. Each
time the COUNTER MODE button is pressed, the
display is changed.
* When pressing the DISPLAY MODE button except during
recording ar playback, the DISPLAY OFF AUTO indicator lights.
In this case, all the indicators go off immediately after recording
or playback starts. INPUT selector indicators
The OPTICAL or COAXIAL indicator lights according to
To change the brightness of the display window the position of the |NPUT selector. No indicator lights when
While pressing the COUNTER MODE button, press one of the INPUT selector is set to the ANALOG position.
the numeric buttons 1, 2 and 3. The greater number
pressed, the darker the display window becomes. [6] Sampling frequency indicator
48 kHz: For recording/playback of analog input signals
(standard mode)
44.1 kHz: For recording/playback of CD or apre-recorded
DAT cassette
32 kHz: For recording/playback of analog input signals
(long-play mode}
12