Download Print this page

Sony DTC-670 Operating Instructions Manual page 38

Digital audio tape deck
Hide thumbs Also See for DTC-670:

Advertisement

Bigelelel(--Jalereyiiate)
The tape is ejected after being | The cassette is inserted incorrectly.
insert the cassette correctly. (page 14)
loaded.
The tape does not move.
For 4 seconds after the power is turned
on, the buttons do not function.
Wait until the blinking of the i indicator
goes off and then try again.
Press the nPAUSE button to release
pause.
The HPAUSE button is activated. (The Il
indicator lights.)
The tape is wound completely.
| Press the <4 or ke button to rewind.
The sound is not heard.
Incorrect connections.
| Connect properly. (page 7)
Incorrect operation of the connected
amplifier.
Operate the amplifier as required by the
deck operation. (Refer to the operating
instructions of the amplifier.)
Recording cannot be made.
The safety tab of the cassette is open.
+——
Incorrect position of the INPUT selector.
Close the tab of the cassette. (page 14)
Set the INPUT selector correctly.
Set it to the DIGITAL position to record
sound from the equipment connected to
the COAXIAL IN or OPTICAL IN jacks.
Set it to the ANALOG position to record
sound from the equipment connected to
the LINE IN jacks.
The digital copy prohibit signal exists in | Connect the source equipment to the
the source signal input to the digital input} LINE IN jacks.
jack.
The sound is not heard from the
When recording analog input signals, the] Adjust the recording level by using the
recorded tape.
recording level is turned down
REC LEVEL control. (page 17)
completely.
(When recording the analog
input signal)
The CAUTION indicator lights,
and no button does function.
Moisture condenses inside the unit.
Leave the unit as is, then turn on the
power. (page 3)
Defective or damaged cassette is
Remove the cassette.
inserted.
The cassette is removed forcibly from the] Turn off the unit and then turn on again.
cassette compartment.
Sub code cannot be written.
The safety tab of the cassette is open.
Close the tab of the cassette. (page 14)
Start ID cannot be written during) A new start ID cannot be written within 9 | Leave at least 9 seconds (18 seconds in
recording.
seconds (18 seconds in the long-play
the long-play mode) from the end of
mode) from the end of another start |D. | another start ID.
38

Advertisement

loading