First Call To The System - Konica Minolta bizhub PRO 1200 Setup Instructions

G. First Call to the System
1. From the "http(Simplex) Setting Menu," select [Basic Setting]
2. Press the "First Call" button.
It is important to wait 5 minutes on this screen after pressing the "First Call" button.
3. Press "OK".
4. Press "Return," then exit Service Mode.
5. Wait 5 minutes, then re-enter the [CS Remote Care] setting in Service Mode
6. Press [ID Code] and enter a 7 digit Tech ID, then Press [ID Code] again
7. The "Maintenance comp" button should now be present
8. Press the "Maintenance comp" button
9. Press "Return", then "Exit" 2x to exit Service Mode.
Konica Minolta bizhub PRO 1200/1200P 1051
bizhub vCare HTTP Setup Guide
Page 19 of 22