First Call To The Vcare System; Troubleshoot Communication Issues - Konica Minolta bizhub PRESS C6000 Setup Instructions

L. First Call to the vCare System
1. Select [Basic Setting] from the [HTTP (Simplex) Setting Menu screen]
2. Select [First Call].
3. After waiting 5 minutes, the display should change from
Calling center now <First Time> to Finished normally <Response>.
4. After the "Finished normally <Response> appears press [ID Code]:
5. Enter your Seven Digit Number (This Number is designated for each technician).
Note: Recommend using your current Tech Number and adding 1's to complete
Seven Digits.
6. Press [ID Code] again.
7. Press [Maintenance Complete].
8. Exit Service Mode.
M. Troubleshoot Communication Issues
1. If an error code occurs when selecting the [First Call] button or if the
"Finished normally <Response> status response does not display, further
troubleshooting can be performed through the Main Body Nic "Web Utilities."
2. After cycling power, open the Main Body Nic "Web Utilities" in an IE browser.
Konica Minolta bizhub PRESS C6000/C7000/C8000/C70hc Main Body bizhub vCare HTTP Setup Guide
Page 15 of 21