Table of Contents
Advertisement
Procedure:
1.
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
2.
or
to the saved dynamic channel then press the Menu Select button directly below Del.
The display shows Channel deleted screen.
3. Press the Menu Select button below Exit to return to Home screen.
The Home screen shows <Dynamic Zone Channels>.
If the channel deleted is the Home channel, the Home screen shows <Zone Name>"Blank".
7.2.7
Zone-to-Zone Cloning
Zone Cloning clones conventional zones from one radio to another.
You can select the followings zones from a source radio and clone them into a target radio.
●
Clone enabled zones
●
Dynamic Zones
●
Multiple Private Line (MPL)
You can clone the zones by connecting the source radio and target radio with a clone cable.
7.2.7.1
Cloning Zones
Procedure:
1. On the source radio, press the Menu Select button directly below Clon.
2. Press the Menu Select button directly below Sel to select source zone.
3. When connecting to the target radio, one of the following scenarios occurs:
●
If the radio is compatible, the radio displays Target radio connected. Proceed to
●
If the radio is not compatible, the radio displays Target radio incompatible. Press the
Menu Select button directly below Ok and the radio returns to the previous screen.
Once connected, the zone clone status is displayed on the right.
4. Press the Menu Select button directly below Next to accept the source zones selection. One of the
following scenarios occurs:
●
If you select a single source zone, press the Menu Select button directly below Sel to select the
target zones for cloning.
●
If you select multi-source zones, the radio displays Confirm target and shows the
automatically selected target zones and source zones mapping.
●
If the selected multi-source zones exceed the last clonable target zone, the radio displays <#>
src zones unselected and Sel exceed max tgt zone alternatively.
5. Press the Menu Select button directly below Clon to begin cloning.
The radio displays Enter password if the protected target zone is selected.
MN004478A01-AN
Chapter 7: Advanced Features
step
4.
57
Advertisement
Table of Contents
