Table of Contents
Advertisement
MN004478A01-AN
Chapter 7: Advanced Features
○
In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.
○
If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
7.15.2
User Login Feature
This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message. This
feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: A predefined username that is set more than the maximum allowed characters is an invalid
name.
7.15.2.1
Logging In as a User
Procedure:
1. Perform one of the following actions:
●
Press the preprogrammed User Login button.
●
or to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2. Perform one of the following actions:
●
or
to [ID Entry] and press the Menu Select button directly below Edit to enter ID. A
blinking cursor appears on the screen. Use the keypad to type or edit a user name. Press the
Menu Select button directly below Ok to submit.
●
or
to scroll through the list of predefined user names. Press the Menu Select button directly
below Sel to select the predefined user name.
●
Press and hold
Press the Menu Select button directly below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary Invalid ID.
3. Enter your Personal Identification Number (PIN) number.
4. Press the Menu Select button directly below Logn.
One of the following scenarios occurs:
●
In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In progress,
with Cncl .
●
In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and Logged
in, with Logt and Exit.
●
In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
Result: One of the following scenarios occurs:
●
If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The
display also shows Login failed.
84
or
to scroll through the list of predefined user names at a fast scroll rate.
Advertisement
Table of Contents
