Deleting A Channel In The Dynamic Zone; Zone-To-Zone Cloning; Cloning Zones - Motorola APX 2000 User Manual

68012005014-HV
Chapter 7 : Advanced Features
You can cancel this operation at this step by pressing the Menu Select button directly below
Cncl to return to Search Options screen.
The display shows Searching.... Once found, the display shows Channel updated.
If the radio is triggered to search for an empty entry, the display shows Invalid entry.
If the entry does not match, the display shows Channel name not found. Repeat from
4 or step 5 to search again.
6 Press to return to the Home screen.
7.1.6.4

Deleting a Channel in the Dynamic Zone

Prerequisites: To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1 or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone
screen.
The display shows the dynamic channels list.
2 or to the saved dynamic channel then press the Menu Select button directly below Del.
The display shows Channel deleted screen.
3 Press the Menu Select button below Exit to return to Home screen.
The Home screen shows <Dynamic Zone Channels>.
If the channel deleted is the Home channel, the Home screen shows <Zone Name>"Blank".
7.1.7

Zone-to-Zone Cloning

Zone Cloning clones conventional zones from one radio to another.
You can select the followings zones from a source radio and clone them into a target radio.
• Clone enabled zones
• Dynamic Zones
• Multiple Private Line (MPL)
You can clone the zones by connecting the source radio and target radio with a clone cable. The target
radio must be digital, band, and FCC mandate compatible with the source radio.
7.1.7.1

Cloning Zones

Procedure:
1 On the source radio, press the Menu Select button directly below Clon.
2 Press the Menu Select button directly below Sel to select source zone.
3 When connecting to the target radio, one of the following scenarios occurs:
• If the radio is compatible, the radio displays Target radio connected. Proceed to
4.
56
step
step