Table of Contents
Advertisement
MN004478A01-AN
Chapter 7: Advanced Features
Procedure:
1.
or to ZnPr. Press the Menu Select button directly below ZnPr to enter the Program Zone screen.
2. Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3.
or
to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4.
or
to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
5.
or
to the required channel. Press the Menu Select button directly below Sel .
The display shows Channel updated.
6. Press the Menu Select button directly below Exit to return to Home screen.
7.2.6.3
Saving a Channel in the Dynamic Zone from Channel Name
Prerequisites: The radio must be in Dynamic Zone in order to perform this operation.
Procedure:
1.
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen.
2. Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3.
or
to Channel Name then press the Menu Select button directly below Sel .
The display shows a blinking cursor on the Channel Name screen.
4. Use the keypad to type or edit the channel name.
5. Press the Menu Select button directly below Srch once the entry is done to initiate searching.
You can cancel this operation at this step by pressing the Menu Select button directly below Cncl to
return to Search Options screen.
The display shows Searching.... Once found, the display shows Channel updated.
If the radio is triggered to search for an empty entry, the display shows Invalid entry.
If the entry does not match, the display shows Channel name not found. Repeat from
step 5
to search again.
6. Press
to return to the Home screen.
7.2.6.4
Deleting a Channel in the Dynamic Zone
Prerequisites: To perform this operation, the radio must be in the Dynamic Zone.
56
step 4
or
Advertisement
Table of Contents
