Integrated Media Block/Server (Optional) - Barco DP K-19B Series User And Installation Manual

Source Port Port type
HD-SDI - 4K

6.8 Integrated Media Block/Server (optional)

Not available for purchase at Barco for use in Taiwanese market.
Depending on the projector configuration the projector card cage is either equipped with an ICP(-D)
or ICMP(-X). In case an ICP(-D) is installed then an IMB, IMS, or HDSDI input module can be
optionally inserted into the slot below the ICP(-D). This is not the case if the ICMP(-X) is installed.
For more information about the ICMP(-X) see chapter called ICMP(-X).
General settings
Mode Scan type
Progressive SF -
2nd field
dominant
4:4:4 10 Progressive
bits/color
Progressive SF -
1st field dominant
Progressive SF -
1st field dominant
4:4:4 12 Progressive
bits/color
Progressive SF -
1st field dominant
Progressive SF -
2nd field
dominant
4:2:2 10 Progressive
bits/color
Progressive SF -
1st field dominant
Progressive SF -
2nd field
dominant
Input & communication
Advanced settings
Color Pixel mapping
space
YCbCr 3G - Level A -
Quad Link
3G - Level B -
Quad Link
RGB 3G - Level A -
Quad Link
3G - Level B -
Quad Link
RGB 3G - Level A -
Quad Link
3G - Level B -
Quad Link
RGB 3G - Level A -
Quad Link
3G - Level B -
Quad Link
XYZ/ 3G - Level A -
RGB Quad Link
3G - Level B -
Quad Link
XYZ/ 3G - Level A -
RGB Quad Link
3G - Level B -
Quad Link
XYZ/ 3G - Level A -
RGB Quad Link
3G - Level B -
Quad Link
YCbCr HD-SDI - Quad
Link
YCbCr HD-SDI - Quad
Link
YCbCr HD-SDI - Quad
Link
R5905753 /17 DPxK-19B/23B/P
Calibration
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
91