Integrated Media Block/Server (Optional) - Barco DP2K-36BLP User And Installation Manual

Source Port
8.6

Integrated Media Block/Server (optional)

Depending on the projector configuration the projector card cage is either equipped with an ICP or ICMP. In
case an ICP is installed then an IMB, IMS, or HDSDI input module can be optionally inserted into the slot below
the ICP. This is not the case if the ICMP is installed. For more information about the ICMP see chapter called
ICMP.
Integrated Media Block (IMB)
Image 8-7
Example of IMB powered by Doremi.
Integrated Media Server (IMS)
Image 8-8
Example of IMS powered by Doremi.
Configuration and operation instructions for IMB and IMS are not included in this document. See manufactur-
ers website of the installed IMB/IMS for technical documentation and support.
1. Only for Quad input board (this is a split screen setting, when selected, it turns on split-screen)
R5906753 DPXK BLP SERIES 20/11/2017
General settings
Port type Mode
HD-SDI - 4K 4:2:2 10
bits/color
Scan type Color
space
Progressive SF - 2nd XYZ/RGB
field dominant
Progressive YCbCr
Progressive SF - 1st YCbCr
field dominant
Progressive SF - 2nd YCbCr
field dominant
8. Input & communication
Advanced settings
Pixel mapping Calibration
3G - Level B - Quad
Link
3G - Level A - Quad Single
Link
3G - Level B - Quad
Link
HD-SDI - Quad Link Single
HD-SDI - Quad Link Single
HD-SDI - Quad Link Single
89