Lan Led Connection Speed Indicator; Lan Led Connection Speed Colors; Power Supply Led States; Conditions Indicated By Drive Carrier Leds - IBM Slicestor 2212 Appliance Manual

Table 7. Legend for rear panel I/O Ports for the appliance (continued)
6
Network interface ports
The LAN ports have two LEDs. One LED indicates activity when it is flashing. The other LED can be
green, amber or off to indicate the speed of the connection, as shown in the following figure. See the
following table for the functions that are associated with the connection speed LED.
Figure 22. LAN LED connection speed indicator
Table 8. LAN LED connection speed colors
Color
Off
Green
Amber
Intelligent Platform Management Interface (IPMI)
This network port allows remote administration of hardware. For a detailed description of IPMI, refer to
the following Intel documentation.
https://www.intel.com/content/www/us/en/servers/ipmi/ipmi-home.html
Power supplies
Each power supply includes one LED with three states in the rear.
Table 9. Power supply LED states
Solid green
System on
On
Hard disk carrier
Each drive carrier has one LED with two states.
Table 10. Conditions indicated by drive carrier LEDs
Condition
Drive activity
Drive failure
Unit identification
button/LED
Speed
No connection or 10 Mbps
100 Mbps
1 Gbps
Solid amber
System off and plugged in.
Plugged in and turned off or the
appliance is off but in an abnormal
state.
12
Flashing amber
Internal temperature reached 63°C.
Appliance automatically powers
down when PSU temperature reaches
70°C and restarts when the PSU
temperature drops below 60°C.
LED color
Green
Red
Chapter 5. Appliance physical interface
Unpopulated PCIe slot
17