Releasing Catch - IBM Elastic Storage System 3500 Service Manual

Figure 12. Removing drive filler
2. Replace with the drive filler replacement part.
a) Press the release catch on the drive carrier in the direction of the arrow to open the handle as
identified in Figure 13 on page 8. The cam releases from the locked position.
Figure 13. Releasing catch
b) Hold the drive blank the correct way up, as shown in Figure 14 on page 8.
Figure 14. Holding the drive blank
c) Ensure that the carrier handle is in the fully open position.
d) Grab the drive filler as shown in Figure 14 on page 8.
8 IBM Elastic Storage System 3500: Service Guide