Advertisement
Identify the Left Handlebar (8) and the Left Upper Body
Arm (11), which are marked with stickers,
Orient the Left Handlebar (8) and the Left Upper Body
Arm (11) as shown, and insert the Left Handlebar into the
Left Upper Body Arm, Attach the Left Handlebar with two
M8 x 43mm Button Bolts (78) and two M8 Jamnuts (79),
Make sure that the Jamnuts
are in the hexagonal
hoJes in the Left Upper Body Arm,
Attach the Right Handlebar (9) to the Right Upper Body
Arm (12) in the same way,
10, Insert the Pivot Axle (74) into the Upright (3) and center
it, Apply a generous amount of the included grease to
the Pivot Axle,
Orient the Left Upper Body Arm (11) as shown, and
slide it onto the left end of the Pivot Axle (74), Slide the
Right Upper Body Arm (12) onto the right end of the
Pivot Axle,
Tighten an M8 x 23mm Button Screw (84) with an M8
Washer (88) and a Wave Washer (111) into each end of
the Pivot AxJe (74), Make sure that the Wave Washers
are on the ends of the Pivot A×leo
11, Hold the Left Front Handlebar Cover (18) and the Left
Rear Handlebar Cover (19) around the Left Upper Body
Arm (11), Attach the Handlebar Covers with three M4 x
32ram Round Head Screws (105),
Attach the Right Front Handlebar Cover (20) and the
Right Rear Handlebar Cover (21) in the same way,
10
88
Grease
74
88
111
11
'\
/
I
105
20
18
19
Advertisement
