Advertisement
Important:
The pace settings
are intended
only to provide
motivation.
Your actuaJ pace
may be slower than the pace settings.
Make
sure to exercise
at a pace that is comfortabJe
for you,
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash, a
series of tones will sound, and aft resistance set-
tings will move one column to the left. The resis-
tance setting for the second segment will then be
shown in the flashing Current Segment column,
and the resistance of the pedals will change to the
resistance setting for the second segment, Note: If
all of the indicators in the Current Segment col-
umn are lit after the resistance settings have
moved to the left, the resistance settings may
move downward so only the highest indicators
appear in the matrix,
The program will continue until the resistance
setting for the last segment is shown in the
Current Segment column and the last segment
ends,
Note: During the program, you can override the
resistance setting for the current segment, if
desired, by pressing the increase or decrease but-
ton, However, when the next segment begins, the
resistance will change if a different resistance set-
ting is programmed for the next segment,
If you stop pedaling for several seconds, a tone
will sound and the program will pause, To restart
the program, simply resume pedaling,
Monitor your progress with the dispJayo
See step 4 on page 13,
Measure your heart rate if desired.
See step 5 on page 14,
Turn on the fan if desired.
See step 6 on page 14,
When you are finished
exercising,
the consote
will automatically
turn off.
See step 7 on page 14,
18
Advertisement
