How To Use The Elliptical Exerciser - Pro-Form XP 130 User Manual

HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO FOLD AND UNFOLD THE ELLIPTICAL
EXERCISER
When the ellipticaJ exerciser is not in use, the frame
can be folded out of the way, First, lift the latch under
each pedal leg, and lift the pedal legs off the sleeves
on the crank arms,
Crank
Arm
Pedal Leg
" Latch
Sleeve
Next, raise the pedal legs until they touch the magnets
on the upper body arms; the magnets will hold the
pedal Jegs in pJace, Then, hold the handle and lift the
frame until it locks in a vertical position,
Handle
Pedal Leg
Frame.
Latch
Butt(
HOW TO MOVE THE ELUPTICAL EXERCISER
To move the elliptical exerciser, first fold it as
described at the Jeft, Next, stand in front of the elJipti°
cal exerciser, hold the handle on the console bracket,
and place one foot against the center of the front sta°
biJizer, PuJl the handle untiJ the elJiptical exerciser wiJl
roll on the front wheels, Carefully move the elJiptical
exerciser to the desired position, and then lower it,
PJace
here
HOW TO LEVEL THE ELUPTJCAL EXERCISER
If the elliptical exerciser rocks slightly on your floor
during use, turn one or both of the JeveJingfeet
beneath the rear stabilizer untiJ the rocking motion is
eliminated,
To use the elliptical exerciser, first hold the handle,
press the latch button, and lower the frame,
Next, pulJ the pedal legs off the magnets on the upper
body arms, Then, lift the Jatches under the pedaJ
Jegs, and set the pedal legs on the sleeves on the
crank arms Release the latches, and make sure that
the pedaJ legs are securely connected to the crank
arms,
Leveling
I0