Hdmi/Dvi - Marantz SR5008 Service Manual

3. HDMI/DVI

3.1. No picture or sound is output (HDMI to HDMI)
No picture or sound is output.
Check HDMI/DVI cable connection.
(1) Is the HDMI/DVI cable properly connected?
(2) Are you using an HDMI/DVI selector, repeater or a device for
improving picture quality?
(3)  A reyouusingacertifiedHDMIcable(withtheHDMIstamp)?
(4) Are you using an HDMI/DVI cable less than 5 meters in length?
(5) Are the picture and sound output when another HDMI/DVI
cable is used?
Check BD/DVD player.
(6) Is the BD/DVD player's HDMI output setting correct?
(7)  W henyouuseamarantzBD/DVDplayer,isthefluorescent
display tube's "HDMI" indicator lit? If you use a non-marantz
BD/DVD player, proceed to "YES".
NO
(9) Is sound output from the set's speaker terminals when the TV's
power is turned off or the connection cable between the TV and
the set is disconnected?
YES
NO
YES
YES
NO
YES
YES
(8) Are the picture and sound
output when the BD/DVD
player's resolution is changed?
NO
NO
(10) Are the picture and sound
output when a different
BD/DVD player is used?
NO
www.audiodna.sk
NO
There may be the a problem with the HDMI/
DVI cable. Check connection.
YES
Disconnect everything and connect only the
HDMI/DVI cable to check
NO
UseacertifiedHDMIcable(withtheHDMI
stamp).
Replace the HDMI/DVI cable with one that
NO
is less than 5 meters in length (2 meters
recommended) to check.
YES
The HDMI/DVI cable is defective.
NO
Check the HDMI output setting, referring to
the BD/DVD player operating instructions.
YES
Set the BD/DVD player output resolution to
a resolution with which the TV is compatible.
YES
The BD/DVD player may not be compatible
with HDCP repeaters. Ask the BD/DVD
player's manufacturer.
YES
The BD/DVD player is defective.
86