CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
Grounding or Polarization – This product m a y b e e q u i p p e d w i t h a p o l a r i z e d alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fi...
Thank you for purchasing the Marantz SR4001/ DO NOT LOCATE IN THE FOLLOWING PLACES SR5001 Surround receiver. To ensure long-lasting use, do not locate the SR4001/ This remarkable component has been engineered SR5001 where it is: to provide you with many years of home theater •...
DESCRIPTION DTS-ES Extended Surround is a new multichannel digital signal format developed by Digital Theater DTS was introduced in 1994 to provide 5.1 channels of Systems Inc. While offering high compatibility with discrete digital audio into home theater systems. the conventional DTS Digital Surround format, DTS- DTS brings you premium quality discrete multichannel ES Extended Surround greatly improves the 360- digital sound to both movies and music.
MULTI (Multi Room) button (SR5001 only) Press this button to activate the Multiroom system. VOLUME “MULTI” indicator will be illuminated in the display. 7.1CH INPUT button (SR4001 only) DOWN Press this button to select the output of an external multichannel player. MEMORY...
Page 8
“REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input This jack may be used to listen to the SR4001/ function. SR5001’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4”...
MTX 6.1 SPKR B ¡8 ¡7 DISP (Display Off) indicator This indicator is illuminated when the SR4001/ This indicator is illuminated when the Video-OFF SR5001 is in the display off condition. function is active. SLEEP timer indicator This indicator is illuminated when the sleep timer This indicator is illuminated when the SR4001/ function in the main-room is in use.
Connect the AC power cable of component such as a DVD or CD player to this outlet. The marked SWITCHED provides power only when the SR4001/SR5001 is turned on and is useful for components which you use every time you play your system.
Page 11
ON. For connection and use, see page 23. Plug the XM Connect-and-play antenna or Passport system into XM terminal. DIGITAL INPUT (SR4001 : Dig.1 - 4, SR5001 : Dig.1-5) / OUTPUT (coaxial, optical) HDMI INPUT/OUTPUT DC TRIGGER output terminal...
Indicates when the remote controller is transmitting a signal. ⁄8 / POWER ON and OFF buttons (When AMP mode is selected) These buttons are used to turn the SR4001/SR5001 on or off. ⁄9 SURROUND button This button is used to selects the surround mode.
Page 13
“ATT” is indicated when this function is activated. and television. The input level reduced. Attenuator is invalid for the Note: output signal of “REC OUT”. Set the AMP mode to use this button with the SR4001/ Note: SR5001. ‹2 VOLUME +/- buttons...
The distance between the transmitter of the remote are getting weak. control and the IR SENSOR of the SR4001/SR5001 should be less than 5 meters. If the remote control is Remove the back cover.
GENERAL INFORMATION OF RC5001SR TO SR4001/SR5001 To control the SR4001/SR5001 by your RC5001SR, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE...
Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) SOURCE ON / OFF Turns the DVD player on and off POWER OFF...
Page 17
CONTROLLING A MARANTZ CD RECORDER (CDR MODE) SOURCE ON / OFF Turns the CD recorder on and off POWER OFF Turns the CD recorder off LEARN SEND POWER ON Turns the CD recorder on SOURCE SOURCE Inputs the numeric SLEEP DISPLAY P.DIRECT...
TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifi er). Learning is not necessary for Marantz products. You PROGRAMMING WITH THE 4-DIGIT CODE can use these products without setting any codes. Press the SOURCE button.
Page 19
For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer.
Surround left and right speakers CONNECTIONS When the SR4001/SR5001 is used in surround operation, the preferred location for surround speakers is on the side walls of the room, at or SPEAKER PLACEMENT slightly behind the listening position. The center of the speaker should face into the The ideal surround speaker system for this unit is 7- room.
Caution: CONNECTING AUDIO COMPONENTS • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
Make component video connections to a TV or monitor with component inputs to produce higher quality video images. Use a component video cable or 3 video cords to connect the component video out jacks on the SR4001/SR5001 to the monitor. INPUT INPUT Notes: INPUT •...
Therefore you need to aim the remote signal only to the unit. Also, if a Marantz power amplifi er (some models excluded) is connected to one of these terminals, the power amplifi er’s, power switch is synchronized with this unit’s power switch.
CONNECTING THE ANTENNA TERMINALS AM Loop FM External Antenna Antenna FM Antenna INPUT VIDEO S-VIDEO FM (75Ω) FM (75Ω) ANTENNA ANTENNA INPUT VCR IN VCR OUT DSS/VCR2 MONITOR OUT MULTI. (AUX2) 7.1CH INPUT VCR1 DSS/VCR2 TAPE CDR/MD AUDIO RS-232C SPEAKER C OFF ON FRONT B FRONT A...
XM RADIO OVERVIEW (SR5001 only) SR5001 is the XM Ready ® receiver. You can receive XM Satellite Radio and-Play or Possport system (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio which includes: •...
CONNECTING FOR THE MULTI ROOM (SR5001 only) INPUT VIDEO S-VIDEO FM (75Ω) ANTENNA INPUT VCR IN VCR OUT DSS/VCR2 MONITOR OUT MULTI. MULTI. (AUX2) 7.1CH INPUT VCR1 DSS/VCR2 TAPE CDR/MD AUDIO AUDIO RS-232C SPEAKER C OFF ON FRONT B FRONT A SURROUND BACK SURROUND BACK SURROUND...
Page 27
* HDCP: High-bandwidth Digital Content Protection CONNECTING HDMI DEVICES An HDMI cable (sold separately) is used to connect the HDMI jack on the SR4001/SR5001 with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack.
DSS :AUTO : 2 : 2 * “8. MULTI ROOM” is displayed only with AUX1:AUTO : F : - the SR5001. MAIN NEXT EXIT * For the SR4001, “–” is displayed for TV 3 PREFERENCE DIG. STANDBY MODE TV-AUTO 1-2 INPUT SETUP OSD INFO...
MENU with 3 or 4 cursor button, and press the ENTER button. 1-1 INPUT SETUP 2 SPEAKER SETUP FUNC:MODE :DIG:HDMI:COMP After you have installed the SR4001/SR5001, ------------------------ connected all the components, and determined the :AUTO : 3 : - DVD :AUTO : 1 : 1...
Set the distance from the surround right speaker This is important for the timing of the acoustics to to your normal listening position. create the proper sound space that the SR4001/ SUB W: SR5001 and today’s sound systems are able to Set the distance from the subwoofer to your produce.
“MAIN” with the 3 or 4 cursor buttons and press the ENTER button. HDMI AUDIO: This setting determines whether to playback audio input to the HDMI jacks through the SR4001/ SR5001 or output it through the receiver to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this receiver.
7 7.1 CH INPUT LEVEL 8 MULTI ROOM (SR5001 only) This sub-menu is to adjust the speaker levels for 7.1- SR5001 has features in MULTI ROOM SYSTEM channel input sources. such as source selector, sleep timer, Multi Room Here you will adjust the volume for each channel so Speaker output and remote control.
The relation of the speakers number and SIMPLE SETUP conectted speaker You can setup the speaker conditions quickly with CHANNEL SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER”...
PREFERENCE menu and set ENABLE. Before you can listen to any input media, you must Notes: fi rst select the input source on the SR4001/SR5001. • The component video signal is emitted only from component video output terminal. Example : DVD...
TREBLE TREBLE TUNER TAPE AUX1 AUX2 To program the SR4001/SR5001 for automatic REMOTE CONTROLLER RC5001SR standby, press the SLEEP button on the remote. Each press of the button will increase the time before shut down in the following sequence. The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed.
2 MODE SURROUND MODE (Dolby Digital, Pro Logic IIx MOVIE, Pro Logic IIx The SR4001/SR5001 is equipped with many MUSIC, Pro Logic IIx GAME, Pro Logic) surround modes. These are provided to reproduce This mode is used with source materials encoded in a variety of surround sound effects, according to the Dolby Digital and Dolby Surround.
Page 37
CD players and LD players cannot recognize the signal as HDCD data. even if you connect the player to the SR4001/ SR5001 digitally. This is because the digital signal has been processed (such as the output level,...
Page 38
The surround mode is selected with the surround AUTO mode selector on SR4001/SR5001 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. That relationship is as follows;...
LISTENING THROUGH HEADPHONES AUTO POWER OFF This jack may be used to listen to the SR4001/ SR5001’s output through a pair of headphones. In the above situation, turn the TV TUNER OFF Be certain that the headphones have a standard or select a channel that does not contain any 1/4”...
SELECTING ANALOG AUDIO INPUT OR RECORDING AN ANALOG SOURCE DIGITAL AUDIO INPUT In normal operation, the audio or video source selected for listening through the SR4001/SR5001 is sent to the record outputs. TUNER This means that any program you are watching...
AUX2 INPUT Select a desired Video source to decide the routed video signal to the Monitor Outputs. If you don’t need to connect 7.1 Ch. input terminals Press the 7.1 CH INPUT button on the front with multi channel decoder, panel or press 7.1 CH IN on the remote to L(front left) and R (front right) inputs terminals are switch the 7.1 channel input.
(FM) TUNING MODE (AUTO STEREO OR MONO) PRESET MEMORY With this unit you can preset up to 50 FM/AM stations SOURCE VOLUME SLEEP DISPLAY P.DIRECT SURROUND in any order. LIP SYNC/ AUTO INPUT For each station, you can memorize the frequency DOWN and reception mode if desired.
Page 43
CLEARING STORED PRESET STATIONS SORTING PRESET STATIONS You can remove preset stations from the memory using the following procedure. 2. 3. LIP SYNC/ AUTO INPUT EX/ES VIRTUAL T.MODE MULTI STANDBY VOLUME M-CH ST STEREO NIGHT P.SCAN POWER ON/STANDBY 7.1CH IN HT-EQ DOWN MEMO...
CHECKING THE XM SIGNAL STRENGTH LISTENING TO XM SATELLITE RADIO AND RADIO ID SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must fi rst select the input source on the SR5001. SOURCE SLEEP DISPLAY P.DIRECT SURROUND LIP SYNC/ AUTO...
When the channel Artist name/Song title is displayed: N A M E / T I T L E P i n k F l o i d F l o i d M o n e y The “NAME/TITLE” is displayed for 2 seconds, followed by the artist’s name and song title.
Page 46
CATEGORY SEARCH MODE You can return to the normal mode by press the MULTI/CAT button during Category Search You can select the desired channel from the category Mode. allocated to each channel. Category being aired can be only selected. Note: Category search automatically ends 5 minutes after 1.
CHECKING THE XM PRESET CHANNEL PRESET MEMORY The preset channel can be checked on the on screen You can store the desired channel in the Preset display. Memory. In addition to AM and FM, it is possible to preset 50 XM channels.
TROUBLESHOOTING If a problem should arise, fi rst check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfuncation.
To use this function, a multi room remote unit and supplied remote controller. remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefl y below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.
S. SPEAKER B button when the than the room in which the SR4001 is located. SURROUND BACK SPEAKER is set except NONE in SPEAKER SETUP menu. (See SPEAKER SETUP,...
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.
Input Sensitivity/Impedance ...168 mV/ 47 Kohms To turn on the SR4001, press and hold the 7.1CH Signal to Noise Ratio(Analog Input / Pure Direct) ... 105 dB INPUT and ATT buttons simultaneously for 3 Frequency Response seconds or more.
Page 56
You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 06/2006 00M03CW851250 ecmf-e...