Reconfigurable FPGA
Power Requirements
You must use a UL Listed ITE power supply marked LPS with the
Caution
cRIO-9075/9076.
Physical Characteristics
cRIO-9075/9076 Operating Instructions and Specifications
cRIO-9075
FPGA type .......................................Xilinx Spartan-6 LX 25
Number of flip-flops........................30,064
Number of 6-input LUTs.................15,032
Number of DSP48s..........................38
Available block RAM......................936 kbits
Number of DMA channels ..............5
cRIO-9076
FPGA type .......................................Xilinx Spartan-6 LX 45
Number of flip-flops........................54,576
Number of 6-input LUTs.................27,288
Number of DSP48s..........................58
Available block RAM......................2,088 kbits
Number of DMA channels ..............5
Recommended power supply..................24 W, 24 VDC
Power consumption ................................15 W maximum
Power supply input range .......................9 to 30 V
If you need to clean the controller, wipe it with a dry towel.
Screw-terminal wiring ............................0.5 to 2.5 mm
Torque for screw terminals.....................0.5 to 0.6 N · m
Weight ....................................................643 g (22.7 oz)
copper conductor wire with
10 mm (0.39 in.) of insulation
stripped from the end
(4.4 to 5.3 lb · in.)
20
2
(24 to 12 AWG)
ni.com