Tripod & Positioner Assembly - Diamond Engineering DAMS 000 Series User Manual

Tripod & Positioner Assembly
Assembly Steps
CAUTION: Damaging any SMA connectors during assembly may result in faulty readings.
BEFORE YOU BEGIN: Unpack all items and ensure there are no damaged or missing parts.
1. Unfold tripod, Remove Threaded ring from adapter plate (Fig. 1)
2. Place the adapter plate onto the tripod- Ensure keys on adapter plate match with the tripod
Then replace the threaded ring to lock the adapter to the tripod (Fig. 2)
3. Have another person assist placing the x250 unit on top of the tripod, use the alignment mark to
help line up the bolt holes. Use the included hardware to attach the x250 unit. (Fig. 3)
Fig. 1
31
Fig. 2
Fig. 3
x250 Installation & Configuration