Sybase Sql-Server; Ssh - Watchguard Firebox X1000 Reference Manual

CHAPTER 4: Types of Services
and a client port of ignore. Then set up incoming access from the allowed
external hosts to the sql*net server.
Characteristics
•
•
•

Sybase SQL-Server

Sybase uses one port for the Sybase Central and SQL Advantage software.
There is no factory default port. Rather, the administrator configures the
port during the installation process using the Sybase Network
Connections dialog box. For WinSock TCP/IP, the port number is
specified as the number following the host name. For example, specify
MyHost,10000 as your connection information to set the Sybase SQL-
Server port to 10000.
The Sybase SQL-Server service is set to server port 10000. Verify that your
Sybase SQL-Server is configured for port 10000. If it is not, either
reconfigure the SQL-Server to port 10000 or create a new service with the
server port to the number that matches the SQL-Server installation. In that
case make sure to set the protocol to TCP and the client port to ignore, as
shown under Characteristics below.
With both the WatchGuard SQL-Server and a custom built service,
configure the rest of the service the same way: list the external clients that
should be allowed to connect to the Sybase server as Incoming From, and
the Sybase server address as Incoming To.
Characteristics
•
•
•

ssh

Secure Shell (ssh) is a free program which allows remote login, command
execution, and file transfer to another computer over a network. It
56
Protocols: TCP
Server Port(s): 1521, 1526
Client Port(s): ignore
Protocols: TCP
Server Port(s): 10000
Client Port(s): ignore
WatchGuard Firebox System