Ipsec Logging Dialog Box; Logging And Notification Dialog Box - Watchguard Firebox X1000 Reference Manual

CHAPTER 10: Field Definitions

IPSec Logging dialog box

Logging and Notification dialog box

206
Enable configuration dump after IKE interpretation
A configuration dump can assist in troubleshooting IPSec tunnels
at the time problems occur.
Enable extra IKE debugging
In addition to the standard status messages logged by the Firebox
regarding IKE, you can enable richer, more thorough debugging
messages. This option can generate a high volume of log entries,
slowing the passage of VPN traffic, and is recommended only for
debugging purposes.
Enable IKE packet tracing
The Firebox can trace IKE packets and log their movements. This
option often generates a high volume of log entries, slowing
passage of VPN traffic. It is generally only used by WatchGuard
Technical Support to assist with debugging an IPSec VPN tunnel
problem.
Category
A list of logging and notification categories. This list changes
depending on the service or option. Click the event name to
display and set its properties.
Enter it in the log
Enable this checkbox to enter an event in the log. All denied
packets are logged by default.
Send notification
Enable this checkbox to send notification when the event occurs.
Clear this checkbox to disable notification for the event.
E-mail
Enable this checkbox to send an event notification via email. You
set the email recipient in the Notification tab of the WSEP user
interface.
WatchGuard Firebox System