Enter Firebox Access Passphrases Dialog Box; Enter Tunnel Name Dialog Box - Watchguard Firebox X1000 Reference Manual

Enter Firebox Access Passphrases dialog box

Enter Tunnel Name dialog box

Reference Guide
Dst Port
Enter a port number to restrict the policy to a single destination
port. To enable communication to all ports, enter 0.
Protocol
Select a protocol type to restrict the routing policy to a particular
protocol. Options include TCP and UDP.
Src Port
Enter a port number to restrict the policy to a single source port.
To enable communication to all ports, enter 0.
Status Passphrase
Enter the Status passphrase , which is used for establishing read-
only connections to your Firebox. Read-only access allows you to
view logs and status of the Firebox but not change configurations.
Confirm
Re-enter the Status passphrase to verify.
Configuration Passphrase
Enter the Configuration passphrase, which is used for
establishing read/write connections to your Firebox. Reat/Write
access allows you full configuraiton access to the Firebox.
Confirm
Re-enter the Configuration passphrase to verify.
OK
Closes this dialog box and saves any changes.
Tunnel Name
Enter the tunnel name. The name is used as an identifier in Policy
Manager.
OK
Closes this dialog box and saves any changes.
Policy Manager
187