Navien NHB H Series Installation And Operation Manual page 32

3.5.4 System Application - Air Handler System
Make-up Water
Backflow Preventer
Pressure Reducing Valve
System application drawings are intended to explain the system piping concept only.
Note
●
Install a filter in the system return to remove foreign objects from the system. Foreign objects inside
●
the system may result in abnormal system operation.
Refer to "3.3 Filling the System" on page 26 for make-up water connections and refer to the
●
requirements of your local codes to ensure compliance.
Air handlers with an internal pump shall be piped either with a crossover pipe at the AHU or in a
●
primary/secondary configuration with the boiler.
Refer to the "3.6.9 Wiring Diagram - Air Handler" on page 43 for wiring connections.
●
You can use a secondary piping configuration for the air handler system to maintain optimal flow
●
and heat capacity.
32 Installing the System Piping
Air Separator
Air Flow
Air Handler
System Pump
(Boiler Pump)
Expansion Tank