Sony WEGA KLV-32M1 Operating Instructions Manual page 61

6
Press 4,/€/4./. to make the desired adjustment,
then press @.
Adjustable options
Option Press €/_, Press €/*
Picture To reduce To enhance
picture contrast, picture contrast.
Brightness To darken the To brighten the
picture, picture.
Color To decrease color To increase
intensity, color intensity.
Hue* To decrease the To increase the
green tones, green tones.
Sharpness To soften the To sharpen the
picture, picture.
Backlight To darken the To brighten the
screen, screen.
* The adjustment is not available for the following:
480i, 480p, 1080i and 720p signals input to HDiDVD
4 IN and HDMI 5 IN
Tip
You can adjust each option by referring to the value beside
each option indicator.
Selective options
Option Description Setting
Color Temp. Select to give white Cool/
(Color colors a blue (Cool) or a Neutral/
Temperature) red (Warm) tint. Warm
NR Select to reduce the noise On Off"
(Noise level of connected
Reduction) equipment. It is also
effective on the signal
from the VHFiUHF jack.
Mild Mode Select for a natural, soft On/Off
picture.
Dynamic Select to enhance the On/Off
Picture picture contrast.
CineMotion Select to provide an On/Off
optimized display by
automatically detecting
film content. Moving
pictures will become
clearer and more natural.
When the superimposed
text on the film content
appears corrupted, set
"CineMotion" to "OFT."
Tip
"CineMotion" is only available for 480i input signal from VHFi
UHF, VIDEO 1 IN, VIDEO 2 IN, VIDEO 3 IN, HDiDVD 4 IN
and HDMI 5 IN.
7 Repeat steps 5 and 6 to adjust other options.
8 Press MENU to exit the menu screen.
To reset to the factory settings
Press RESET while the menu is on the screen and
the cursor is located on the right side of any menu
item. When the pop-up window or bar indication is
displayed, only the menu item being adjusted is reset
to the factory setting.
RESET
C
¢Cl
>
CL
<
_0
C)
CL
'rl
(0
t--
8
(a0
61