Sony WEGA KLV-32M1 Operating Instructions Manual page 29

Connecting a DVD Player with Component Video
Connectors
Use this hookup if:
• Your DVD player has component (Y, PB, PR).jacks.
Tips
• The Y, PB and Pajacks on your DVD player are sometimes labeled as Y, C_ and C_, or Y,
B-Y and R-Y. If so, connect the cables to the matching colors.
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to
16:9 on your DVD player. For details, refer to the operating instructions supplied with your
DVD player.
Disconnect all power sources before making any connections.
2
Using a component video cable, connect the DVD player's Y, PB and Pa
.jacks to the Y, PB and PRjacks on the TV. Use the HD/DVD 4 IN
connections.
Using an AUDIO cable, connect the DVD player's AUDIO OUT.jacks to
the TV's AUDIO IN jacks.
Note
The Y, PB and Px jacks do not provide audio, so audio cables nmst be connected to
provide sound.
Rear of TV
O
O
o
5
t.Q
CL
03
t Q
-4
<
2
AUDIO-L q
AUDIO-R q
AUDIO cable
(not supplied)
H0/OVO IN
Component video cable
(not supplied)
DVD Player
29