Sony WEGA KLV-32M1 Operating Instructions Manual page 21

Rear Panel Connectors
_Q
_D
<
VIDEO iN
r-AUDIOI
Jack Description
[] AC IN Connects the supplied AC power cord.
[] VHFiUHF RF input that connects to your VHFiUHF antenna or cable box.
[] HDMI 5 IN HDMI (High-Definition Multimedia InteriZace) provides an uncompressed, all-digital audio/video
HDMIiL-AUDIO-R interface between this TV and any HDMI-equipped audio/video component, such as a digital satellite
receiver, digital cable box, DVD player, and AV receiver. HDMI supports enhanced, or high-definition
video, plus stereo digital audio.
[] VIDEO 1/3 IN Connect to the composite AiV output jacks on your VCR or other video component. A third composite
VIDEOiL-AUDIO-R AiV input jack (VIDEO 2 IN) is located on the fi'ont panel of the TV. These video connections provide
better picture quality than the VHFiUHF (_]) connections.
[] HDiDVD 4 IN Connect to your DVD player's or digital satellite receiver's or digital cable box's component video (Y,
Y, PB, PR'L-AUDIO-R PB, PR) and audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (_]),
the VHFiUHF ([]) or the composite video ([]) connections.
[] AUDIO OUT Connects to the left and right audio input jacks of your audio or video equipment. You can use these
(VAR.FIX) LiR outputs to listen to your TV's audio through your stereo system.
[] _1 CENTER SPEAKER Connect the center output terminals of an audio ecluipment that has multi-channel speaker outputs, such
IN 180W (6f2) MAX as an AV receiver with a Dolby Digital* (AC-3) decoder. You can use the TV speakers as a center
speaker.
[] VIDEO I/3 IN Connects to the S VIDEO OUT jack of your VCR or other video equipment that has S VIDEO. S
S VIDEO VIDEO provides better picture quality than either composite video ([]) or VHF&JHF ([]) connections.
* Dolby, Dolby Digital and the double-D symbols are trademarks of Dolby Laboratories.
21