Sony WEGA KLV-32M1 Operating Instructions Manual page 15

Button
[] Input Select
Buttons
[] VOL + .....
[] RESET
[] FREEZE
[] POWER
[] DISPLAY
[_SLEEP
[] 0 - 9 ENT
[] MENU
[] (Z)
[_F1
[] F2
Description
Press to select the video equipment
connected to the TV's video inputs.
TV: Press to select the TV to watch the
TV programs.
VIDEO 1/2/3: Press repeatedly to cycle
through the video eqnipment connected
to the VIDEO 1 IN, the VIDEO 2 1N
and the VIDEO 3 IN.
If the video label is selected as "Skip,"
the selected input will be skipped from
the cycle.
VIDEO 4: Press to select the video
equipment connected to the HDiDVD 4
IN.
VIDEO 5: Press to select the video
equipment connected to the HDMI 5 IN.
Press to adjust the volume.
Press to reset the settings to the factory
defaults. See pages 61 and 63. Also
used to clear Channel Label.
Press to freeze the picture. Press again
to restore the picture. For details, see
"Using the Freeze Function" on page
50.
Press to turn on and offthe TV.
Press once to display the current
channel number.channel label and the
Wide Screen Mode, or the current
video input number video label and the
Wide Screen Mode. When the display
is mined on, the current channel
number.channel label or video input
number.video label remains displayed.
Press it again to mm the display of_
Press repeatedly until the TV displays
the time in minutes (15, 30, 45, 60 or
90) that you want the TV to remain on
before shutting off. To cancel Sleep
Timer, press SLEEP repeatedly until
Sleep Off appears.
Press 0 - 9 to select a channel; the
channel changes after 2 seconds. Press
ENT to change channels immediately.
Press to display the menu. Press again
to exit from the menu. For details, see
page 39.
Press t,/.!./_,/* to move the on-screen
cursor. To select an item, press (_).
Press to select the function of your
video equipment which is programmed
on the TV's remote control.
Press to select the function of your
video equipment which is programmed
on the TV's remote control.
Button
[] CH +/
[] (0)
TViSAT
Description
Press to scan through channels. To scan
quickly through channels, press and
hold down either CH.
Press to select the sound effect modes:
TruSurround, Of*_ The sound effect
modes can be also accessed in the
Audio menu. For more details, see
"Selecting the Effect Mode" on page
45.
When FUNCTION is switched on SAT/CABLE
Press to switch between the TV and the
satellite receiver.
[] MTS SAP
GUIDE
Press repeatedly to cycle through the
Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP (Second
Audio Program), and Mono. The MTS
setting can be also accessed in the
Audio menu. For more details, see
"Selecting Stereo or Bilingual
Programs" on page 63.
When FUNCTION is switched on SAT/CABLE
Press to display the program guide of
your satellite program provider.
if}
¢Cl
-q
<
15