Sony UP-890CE Service Manual page 9

1-6. LOADING PAPER
3 Place the paper roll in the printer.
* Do not fold the paper or touch the printing surface. Dust on the printing surface
will result in poor print quality.
* After loading the paper roll, pull out and cut off the first 15 to 20 cm (6 to TA
inches) to remove any slack.
¢ Use only UPP-110 series paper (p. 19).
* Set the PAPER TYPE selector according to the paper type (p. 6).
Loading
1 Press the power ON/OFF switch to turn on the printer,
Place the paper with the thermo-sensilive
side (printing side) up.
A Pull out the first 15 to 20. cm (6 to 7% inches) of the paper to remove any
slack in the roll.
| 2 Press the OPEN/CLOSE button to open the paper lid.
5 Press the OPEN/CLOSE button to close the paper lid.
You can also close the paper lid simply by pushing it.
10 | Preparation
Preparation | 11