Sony UP-890CE Service Manual page 5

Video graphic printer
Hide thumbs Also See for UP-890CE:
Table of Contents

Advertisement

1-2. LOCATION
AND
FUNCTION
OF
PARTS
For details, refer to the pages indicated in parentheses.
{1] Power ON/OFF switch and indicator
Turns the power on. The indicator is tit while
the power is on.
CS)
Printing size selector (13)
Selects the printing size.
STD (standard)/SIDE selector (13)
Selects the printing direction.
&e
CONTR (contrast) control (15)
Adjusts the contrast of the print-outs.
@
THRU/EE selector (15)
Selects the video signal output from the
VIDEO OUT connector.
THRU: Input signals are directly output to
the video monitor.
FE: Input signals are output to the video
monitor after being processed by the printer's
circuitry.
Others
[6] BRIGHT (brightness) control (15)
Adjusts the brightness of the print-outs.
COPY button (14)
Prints another copy of the previous print-out.
PRINT button (12)
Prints the picture currently displayed on the
video monitor. The picture displayed when
you press the PRINT button is stored in
memory.
(9) PAPER EMPTY indicator
Lights when the printer is out of paper.
OPEN/CLOSE button (10, 14)
Opens or closes the door. Also, stops printing
midway.
iy) Paper feeder and cutter
Cuts the printing paper.
REMOTE connector (5)
Connect the RM-¥91 remote commander
for
controlling print operation from a distance.
The RM-91 remote commander is supplied
with UP-890MD only.
GAMMA selector (6)
Changes the print mode to that for high-
density printing paper. The selector is
effective when the PAPER TYPE selector is
set to Tlor1V.
{os}
PAPER TYPE selector (6)
Sets the type of paper.
[4] DIP SW (switches) (7 - 9)
Sets the print modes and functions.
VIDEO IN (input) connector (BNC
type) (5)
Connect to the video output connector of the
video equipment.
[6]
VIDEO OUT (output) connector (BNC
type) (5)
Connect to the video input connector of the
video monitor. The output signal type
depends on the setting of the
THRU/EE
selector.
AC IN (AC power input) connector (5)
Connect to a wall outict using the supplied
AC power cord.
Equipotential terminal
Fquipped only with the UP-890CE/890MD.
Others
| 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Up-890md

Table of Contents