Using Remote Controller; Overview; Calling Up A Preset Radio Station; Controlling An Onkyo Cassette Tape Deck - Onkyo TX-DS797 Instruction Manual

Using remote controller
Overview
The RC=460M remote controller is a useful 1ooi to help you operate
the components of your home theater. "I_ do so, first press the Mode
button that corresponds Io the device you wish to control. Then
simply press the desired operalion button and the component will
operate accordingly. For example, if you wish to select the CD input
source at the TX=DS797 with the remote controller, first press the
RCVR MODE button 1o select the TX=DS797 and then press the CD
(INPUT SELECTOR) button.
®®®@
TUN
Calling up a preset radio station
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the TUN input selector button.
3. Press the CH _ or = button to select the desired
preset station number.
RCVR
MUTING
TAPE
operation
buttons
Controlling an Onkyo tape
cassette deck
The RI connector of the Onkyo cassette tape deck must be
connected Io the TX=DS797 (see page 14).
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the desired operation button.
The butlons shaded in the figure to the left are the operation
buttons thai can be used Io control an Onkyo cassette tape deck.
Operation buttons:
[_,: Play
[2: Stop
<_: Rewind
[Z>: Fast forward
C:_: Press during playback to skip to the beginning of the next 1rack.
Z_:a:Press during playback Io skip to the beginning of the current
track.
R (Re¢): RecoM/Pause
@: Reve_:se playback
You may also use the following buttons:
VOL _/V: Adjusts the volume at the TX-DS797
MUTING: Activates the muting function at the TX-DS797
Note:
Even for devices with the _ and _ butlons, signal discrepancies
may cause them not Io work properly.
56